Search

49 results

Sorting:

Title Date

Use polluted exhaust gases for heat recovery?

Date: 13-04-22

From our experience, we recommend an open dimple plate heat exchange system with smooth,

Single embossed plate as frying plate with edged stability

Move, temper, heat or cool products at the same time?

Date: 13-04-22

For this purpose, our single embossed dimple plate heat exchangers are suitable. Direct contact or direct heat transfer over the smooth side

1900 kW baudelot ice water cooler NH3 pumped mode without water collection tank

Cooling and heat recovery?

Date: 13-04-22

In the case of cooling polluted liquids in the process of heat recovery or the use of a heat pump, we recommend an open, accessible at any time generating ice water unit,

Better surface cleaning and heat transfer compared to tubes

Cool corrosive, bioactive or contaminated liquids?

Date: 13-04-22

Our customers use our seawater-resistant or high-alloy stainless steel dimple plate heat exchange system in cases of seawater or bioactive liquids.

Do you want to circulate liquids in an agitator tank and at the same time temper them?

Date: 13-04-22

In this case, the heat exchange plate is used as a flow breaker in the tank. In the case of the flow breaker, we use double embossed dimple plate heat exchangers,

Storage and tempering of liquids in the tank at the same time – homogeneous and precise, with steam, water or coolant?

Date: 13-04-22

Then we recommend to build a tank from our single embossed dimple plate heat exchanger as a tank wall or to use a double embossed dimple plate as clamp-on part for your existing tank.

Dimple Plate

Date: 10-05-22

Solution concept and Design As a result of our analysis, the idea of the dimple plate solution concept and its design takes place. Consequently, we also look after and accompany the customer after…

About us

Date: 11-05-22

Process technology and know-how Heat Transfer Technology AG provides the know-how of process technology. This cooperation is a successful combination for the customer as such. Heat Transfer…

Use low-cost night-time electricity tariffs and avoidance of peak loads for refrigeration?

Date: 11-05-22

The use of electricity at night, in contrast to peak periods during the day to large savings in electricity bills. Since the cooling system is designed to average consumption, it consumes

Water connection to the top water distribution tray

Minimize the refrigerant content of your refrigeration system?

Date: 11-05-22

For the same performance, dimple plate heat exchangers have significantly lower refrigerant contents than comparable tube systems.

Heavily fluctuating volume flows or inlet temperatures?

Date: 11-05-22

Fluctuating amounts of water or water inlet temperatures cause this to affect the performance. This can have a variety of reasons.

Distinctive cooling load peaks due to water quantity or temperatures?

Date: 11-05-22

Ice silos make it possible to significantly reduce investment costs, since cooling systems no longer have to be designed according to the load peaks, but the design is based on the average demand.

Split tank under the falling-film chiller

Volume flows in the glycol/ice water heat exchanger

Date: 11-05-22

In 2-circuit refrigerant systems it is known that at full load the volume flow of the generator circuit should rather be larger,

Natural Refrigerant ammonia

Date: 11-05-22

Ammonia has been used as a natural refrigerant in industrial refrigeration plants for over 100 years. It is a colourless gas liquefied under pressure with a pungent smell. As a refrigerant, ammonia…

Industrial process technologies

Date: 13-05-22

Single embossed dimple plate in use as base plate tank wall Individual pillow-plate heat exchangers profiled on one side can be used in a variety of ways. Not only the mentioned above. Pillow-plates…

Falling-film chiller installation with compressor unit

Refrigeration

Date: 13-05-22

Refrigeration technology and operational liability and maximum running times In particular, main tasks are problems of fluctuating water volumes or irregularities in the operation of the existing…

Cool foods with high hygienic requirements stainless steel

Do you need to cool foods with high hygienic requirements as quickly as possible?

Date: 13-05-22

For this purpose, our falling film chiller make sense, the water is reliably cooled to 0.5 ° C, without the risk of damage to the apparatus due to ice build-up.

To cool meat or fish?

Date: 13-05-22

Then ice is required that is not sub-cooled and is easily transportable.

To show your products on ice?

Date: 13-05-22

For this you need flexible chip ice pieces, not sub-cooled, which give the cooling power slowly, over a longer period.

Automated ice extraction from ice machine

Cooling with cutter shredding?

Date: 13-05-22

In this case, tests by a leading German meat processor show that the ice quality from our industrial ice maker is ideal. It is not sub-cooled, does not bake, is easily dosed, easy to transport and is…

Search results 1 until 20 of 49

The search query was processed in 104 ms.

We have always assimilated engineering science and thermodynamics optimally in the various manufacturing processes.

Thermodynamicists,mechanical engineers and welding engineers define the dimensioning, design and construction of customised heat exchanger panels and systems in materials ranging from mild and austenitic steels through to titanium, and ensure successful distribution of their work worldwide.

In doing so they fall back on production engineering expertise and calculations developed in the course of the past hundred years that are still being continuously optimised in an ongoing process.

In the perception of our customers, the Buco product stands for:

Technical and process-oriented consulting
Thermodynamic efficiency
Quality and longevity